ASN-V
ASNV Series Vertical Double Suction Split Casing Centrifugal Pump
ASN-V Series adalah pompa submersible vertical mixed flow yang dirancang untuk memindahkan air dalam kapasitas besar dengan kombinasi head menengah dan efisiensi tinggi.
Pompa ini bekerja dengan memutar impeller tipe mixed flow di dalam air, menghasilkan aliran fluida yang kuat dan stabil menggabungkan karakteristik axial (debit besar) dan centrifugal (tekanan lebih tinggi). Hal ini membuat ASN-V sangat ideal untuk aplikasi seperti drainase, irigasi, pengolahan air, hingga pengendalian banjir.
Technical Specifications
| Pump Type | Vertical Double Suction Split Casing Centrifugal Pump |
| Series | ASNV Series |
| Construction | Single-Stage, Double-Suction, Split Volute Casing |
| Configuration | Vertical Split Case Pump |
| Impeller Type | Double Suction Closed Impeller |
| Casing Design | Double Volute Split Casing |
| Shaft Arrangement | Vertical Shaft |
| Mounting | Vertical Installation |
| Seal Type | Mechanical Seal (BURGMANN) or Packing Seal |
| Bearing Type | SKF / NSK Anti-Friction Bearings |
| Pump Design Standard | High-Efficiency Split Case Design |
| Applications | Water Treatment Plants, HVAC Systems, Water Recycling, High-Rise Buildings, Irrigation & Drainage Stations, Power Plants, Industrial Water Supply, Fire Fighting Systems, Shipbuilding |
| Capacity (Flow Rate) | Up to 11,600 m³/h |
| Head Range | Up to 200 m |
| Outlet Diameter | DN80 – DN800 |
| Liquid Temperature | Up to 105°C |
| Solid Content | ≤ 80 mg/L |
| Hydraulic Efficiency | High-efficiency double-suction hydraulic design |
| NPSH Characteristics | Excellent anti-cavitation performance |
| Operating Speed | Typically 980 / 1480 / 2980 rpm (depending on motor selection) |
| Axial Thrust | Minimized through double-suction impeller design |
| Radial Load | Reduced by double-volute casing construction |
| Motor Type | Three-Phase Induction Motor |
| Installation | Vertical Coupled Motor |
| Frequency | 50 Hz / 60 Hz |
| Voltage | 380V / 415V / 660V / Medium Voltage Options |
| Protection Class | IP44 (Standard), IP55 Optional |
| Insulation Class | Class F |
| Duty Rating | Continuous Duty (S1) |
| Coupling Type | Flexible Coupling |
| Motor Power | Selected according to pump duty point |
| Cooling Method | IC411 Air-Cooled |
| High Power Option | Medium Voltage Motor Available (>200 kW) |
| Pump Casing | Gray Cast Iron, Ductile Iron, Cast Steel, Stainless Steel |
| Impeller | Bronze, Gray Cast Iron, Silicon Brass, Stainless Steel |
| Shaft | Stainless Steel, Carbon Steel |
| Wear Ring / Seal Ring | Bronze, Gray Cast Iron, Silicon Brass, Stainless Steel |
| Mechanical Seal | BURGMANN Mechanical Seal |
| Bearings | SKF / NSK Bearings |
| Fasteners | Carbon Steel / Stainless Steel |
| Liquid Type | Clean Water, Industrial Water, Circulating Water |
| Maximum Liquid Temperature | 105°C |
| Maximum Solid Content | 80 mg/L |
| Ambient Conditions | Standard Industrial Environment |
| Operating Mode | Continuous Operation |
| Rotation Direction | Clockwise (Standard) |
| Leakage-Free Operation | Up to 8,000 Hours with BURGMANN Mechanical Seal |
| Corrosive Service | Available with Special Material Construction |
| Typical Installations | Municipal Waterworks, Industrial Plants, Ports, Fire Systems, HVAC Systems |
| Outlet Diameter | DN80 – DN800 |
| Suction Type | Double Suction |
| Discharge Type | Vertical Discharge |
| Connection Type | Flanged |
| Flange Standards | GB, HG, DIN, ANSI |
| Pump Orientation | Vertical |
| Casing Type | Split Volute Casing |
| Mounting Type | Vertical Base Mounted |
| Maintenance Feature | Split Casing Allows Easy Access to Internal Components |
| Impeller Diameter Range | Depends on model (e.g., ASNV 150-350 series) |
